|
|
|
|
Thread Tools | Display Modes |
06-04-2021, 10:29 AM | #176 |
Scooby Newbie
Member#: 8463
Join Date: Jul 2001
Chapter/Region:
South East
Location: Jax
Vehicle:21 STi (stock) Ice Silver Metallic |
Cool to know that something like this exists. I guess the OP hasn't been around in a while, but, has anyone finally received their harness from ebay? Or, is SMYperformance.com and free_refil the only way to get the harnesses, now?
* Registered users of the site do not see these ads.
|
06-09-2021, 11:16 PM | #177 | |
Scooby Newbie
Member#: 467769
Join Date: May 2017
Chapter/Region:
NWIC
Location: Seattle
Vehicle:2018 STI Limited WRB |
Quote:
I did receive my order through ebay but I ordered last year in October/November. I would have went through SMY if that option had existed at the time as I've had good experience buying through them. |
|
01-21-2022, 12:45 PM | #178 |
Scooby Newbie
Member#: 514939
Join Date: May 2020
|
Has anyone been able to install the front view camera on a base trim? Sounded like OP was working on it a while ago but I haven't seen anything in their store or on their instagram
|
02-05-2022, 08:38 PM | #179 |
Scooby Newbie
Member#: 26698
Join Date: Oct 2002
Location: Colorado
Vehicle:2018 STi WR Blue |
Worked no problem on my 2018 base STi.
|
06-04-2022, 10:24 PM | #180 |
Scooby Newbie
Member#: 507126
Join Date: Oct 2019
|
Can anybody shine light on what’s needed for a 2020 WRX premium? I don’t have SRH and only 2 wires at the connector under battery.
|
06-05-2022, 08:32 PM | #181 |
Scooby Specialist
Member#: 347474
Join Date: Feb 2013
Location: Pennellville,N.Y
Vehicle:0219 Bug,bug,coup,va mbp,sr,wrb |
He sends you a different setup where you run the wires from the plug for the front camera to the adapter which plugs inbetween the mfd and its original harness. I fed the wire down into the drivers fender and through the grommet that the cable release goes through. I fed it from the bumper up to the top of the fender then down in the back towards the firewall. You remove the rear bottom portion if the wheel liner to access this entey point. I taped the end to a paperclip after straightening with a long flat hook on the end to help feed through. Then dropped most the panels under the steering wheel. Then I removed the cluster surround and cluster. Then the center vents above the radio and the panel in front of the mfd. To remove that panel I used metal wire in the shape of a hook to pull straight forward to pop that panel out. Then a few screws and pop the mfd up and you have access to the plug for the mfd. Take the wire you fed through the grommet on the lower a pillar and feed it up behind the cluster into the area filled with some kind of insulation up into the mfd mounting area. Open the plug to recieve the pins then close. Then plug the adapter in between the mfd and original harness and put it all back together. There's a video where he shows where the pin goes and how to open and close the plug and the best way to insert and lock the pins.
|
09-19-2022, 10:48 PM | #182 |
Scooby Newbie
Member#: 149548
Join Date: May 2007
|
I picked up one of these from the OP for my 2020 Limited STI. I sold it and moved onto a Golf R before I could install it. If anyone needs one for a deal, shoot me a DM.
|
Thread Tools | |
Display Modes | |
|
|