|
|
|
|
Thread Tools | Display Modes |
01-11-2021, 02:20 PM | #1 |
Scooby Newbie
Member#: 303720
Join Date: Dec 2011
|
2011 2.5i ecu
I’ll try to make this as short as possible ...I did an engine swap from an 09 Impreza into this 2011 2.5i ( the car ran before but the motor was clearly blown ) so after I put the new motor in I made the mistake of keeping the wiring harness from the 09 on it and tried to start it . Pretty sure I fried the ecu . Swapped the old harness back and still nothing ( no spark , crank sensor code ) . I’ve tried pretty much everything before deciding it must be the ecu . So , does anyone know if these ecu repair websites are legit? The dealer wants me to tow it there , buy a new ecu from them and have them program it for around 1000$ . I found this site called module experts that claim they can repair it and it’ll be “plug an play” but I wasn’t sure if they’re legit . Thanks
* Registered users of the site do not see these ads.
|
01-14-2021, 11:54 PM | #2 |
Scooby Guru
Member#: 487
Join Date: Nov 1999
Chapter/Region:
TXIC
Location: Houston TX
Vehicle:1998 /2005 STunIcorn Acadia Green USDM 22b |
|
01-15-2021, 12:00 AM | #3 |
Scooby Guru
Member#: 487
Join Date: Nov 1999
Chapter/Region:
TXIC
Location: Houston TX
Vehicle:1998 /2005 STunIcorn Acadia Green USDM 22b |
Took me a while .........
After u put in car u want -electrical -computer engine Then pick what ECM you need |
01-15-2021, 12:33 PM | #4 |
Scooby Newbie
Member#: 303720
Join Date: Dec 2011
|
The dealer won’t sync a used ecu . That’s why I was trying to get the original repaired
|
01-15-2021, 12:34 PM | #5 |
Scooby Newbie
Member#: 303720
Join Date: Dec 2011
|
|
01-16-2021, 07:47 PM | #6 |
Scooby Guru
Member#: 487
Join Date: Nov 1999
Chapter/Region:
TXIC
Location: Houston TX
Vehicle:1998 /2005 STunIcorn Acadia Green USDM 22b |
Screw Dealership
Tuner can Or Specialty mobile auto electronic companies can Think of it this way Doubtful that vendors would sell ECMs for $100-$200 if they were just dead weight |
01-17-2021, 03:42 PM | #7 |
Scooby Newbie
Member#: 303720
Join Date: Dec 2011
|
Do you have one you could recommend ? I couldn’t find a company that would do it other than the dealer
|
Thread Tools | |
Display Modes | |
|
|