Ok so here is the situation I have a 2011 Legacy 2.5i premium, already have #streetrays 2" strut spacers, i have the #ADF rear sub-frame drop I think my Legacy is looking good but I would like a little more lift. After doing some research I was able to determine that I can buy the rear king wagon springs for my sedan to give that extra lift, but nothing for the front though I have received a quote on front springs with .5" lift and 30% stiffer from a company I have used in the past for custom springs. From research I see different models swap struts to get the lift on other models. Does anybody or has anybody put 2011+ Outback struts and springs on the Legacy. I know this is not a normal car to do these lifts on. I see coil spring part numbers are different for the Legacy and the Outback.