|
|
|
|
Thread Tools | Display Modes |
02-11-2021, 12:23 PM | #1 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 519102
Join Date: Oct 2020
Location: Jenks, OK
|
D25 Complete Heads and D25 blanks
I have a pair of D25 heads. 0 miles according to the person I purchased the longblock from. I’m going to be using the shortblock for a hybrid swap. The lash is set. I’ve done a leak down test with an old gasket and all cylinders were 5%. I put helicoils into the right side inner cam shaft holder (the ones on the outside of the engine); I would recommend them on the remaining outside bolts. I can do this for for an additional $30. Asking $1200 OBO.
No valve covers. Also, I have a pair of D25 blanks. There not warped. I’ve put a mechanics level on them. There are no cracks. $400 OBO
* Registered users of the site do not see these ads.
Last edited by vanman23; 02-13-2021 at 11:59 PM. |
03-02-2021, 10:26 AM | #7 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 519102
Join Date: Oct 2020
Location: Jenks, OK
|
More pics
Right side Left side With an engineers level, I can not get a 0.0005 inch feeler gauge to go through anywhere on the cylinder heads. Subaru allows 0.002 inches of warpage. |
Thread Tools | |
Display Modes | |
|
|