|
|
|
|
Thread Tools | Display Modes |
09-14-2021, 10:18 PM | #1 |
Scooby Newbie
Member#: 447001
Join Date: May 2016
Vehicle:2014 WRX White |
Source for 2014 WRX ecu female pins
De-pinned four like a boss, fifth one not so much.
Anyone have a source for these?
* Registered users of the site do not see these ads.
|
09-19-2021, 05:47 PM | #2 |
Scooby Newbie
Member#: 160264
Join Date: Sep 2007
Chapter/Region:
Tri-State
Location: S.I, NY
Vehicle:95 20G'd EJ257 GM6 |
Subaru ECU pins cannot be removed without destroying the pins. You can get replacements from iwire, but they're super pricey.
|
09-23-2021, 11:32 AM | #3 |
Scooby Newbie
Member#: 447001
Join Date: May 2016
Vehicle:2014 WRX White |
That's for sure. I have pin out tools but you can see in the pic that the terminal opening is a little oblong from removal.
iWire was very helpful and suggested these: https://www.iwireservices.com/product-page/dbw-ecu-terminals These were close, but not exact. The pin didn't click into place but the terminal gate lock kept it from backing out of the hole. Plugged into ECU fine. Its for the tach signal so I guess I will know right away if its not working. |
09-23-2021, 09:22 PM | #4 |
Scooby Newbie
Member#: 160264
Join Date: Sep 2007
Chapter/Region:
Tri-State
Location: S.I, NY
Vehicle:95 20G'd EJ257 GM6 |
I ended up buying a whole new connector for my project that included the pins. if they don't fit I don't know what I'll do!
|
Thread Tools | |
Display Modes | |
|
|