|
|
|
|
Thread Tools | Display Modes |
09-09-2019, 01:25 PM | #1 |
Scooby Guru
Member#: 67
Join Date: Jul 1999
Chapter/Region:
SCIC
Location: San Diego, CA
Vehicle:1999 Outlasting the competition. |
2019 Crosstrek MallCrawlerRated Lift Kits. Testers Wanted
For the bro's. I've been beating up the prototype Crosstrek Lift kit the past few months and were just about ready to release a short run, pre production number of kits before full blown run. 1.5" lift. Few things that we hope set us a part. Complete rear ARB relocation brackets out of 11G steel. With double shear on the upper mount. Mix of Tig and Mig welded. Powder-coated parts. Custom length DOT rated brake lines. This will get rid of the drop brackets that some of the other kits will use. Little more involved with the install, but 100% worth it. Brake pedal feel is much nicer. Front tophat spacers are camber and caster corrected for proper alignment geometry. Pricing should be right in line with the other complete options on the market. All made in house.
We are looking for a few testers. You will get a complete kit at a greatly reduced price. Email me at [email protected] if you are interested. Few shots. Some of the raw parts before welding and coatings.
* Registered users of the site do not see these ads.
|
09-12-2019, 03:15 PM | #2 |
Add Lightness
Moderator Member#: 13699
Join Date: Dec 2001
Chapter/Region:
NESIC
Location: Hopkinton, MA
Vehicle:2021 Building It Better |
So tempting. With the much greater wheel well room of the 18+, this is far more doable than with the old one. We have one of each and stock sized snows rub on the 13 while there are fingers of room on the 19.
But I would never offroad mine. That's what the Wrangler's for. |
09-12-2019, 04:48 PM | #3 |
Scooby Guru
Member#: 67
Join Date: Jul 1999
Chapter/Region:
SCIC
Location: San Diego, CA
Vehicle:1999 Outlasting the competition. |
I put some more shots on our instagram page. @k4rt30y
|
10-21-2019, 10:59 AM | #4 |
Scooby Specialist
Member#: 204172
Join Date: Feb 2009
Location: NorCal
Vehicle:---- 05 STi -- 18 XV |
Lookin good
|
10-22-2019, 05:11 PM | #5 |
Scooby Newbie
Member#: 440547
Join Date: Feb 2016
|
Any idea if these would work on a '16 Impreza? About time to replace the tires but was hoping to hold out for a bit of lift first
|
11-05-2019, 02:39 PM | #6 |
Scooby Guru
Member#: 67
Join Date: Jul 1999
Chapter/Region:
SCIC
Location: San Diego, CA
Vehicle:1999 Outlasting the competition. |
Were working on a kit for that. i think it'll be pretty easy to modify/mix and match of our current kartboy line to make something pretty kick ass. Stay tuned
|
11-19-2019, 11:29 AM | #7 |
Scooby Specialist
Member#: 22647
Join Date: Aug 2002
Chapter/Region:
NWIC
Location: Emerald Cityish
Vehicle:2022 WRX GT 2021 Crosstrek |
|
12-24-2019, 02:57 PM | #8 |
Scooby Guru
Member#: 67
Join Date: Jul 1999
Chapter/Region:
SCIC
Location: San Diego, CA
Vehicle:1999 Outlasting the competition. |
Second production is almost gone, I do have a few kits with some slight scratches on the aluminum parts that i'm blowing out at 200 off. https://www.kartboy.com/collections/...-scratched-kit
Mechanically this kit is 100% fine. just a few marks on the anodizing. T |
Thread Tools | |
Display Modes | |
|
|