Whose, who, what and where - Page 2

Coolingmist · 08-19-2007, 04:46 PM

Coolingmist has release a direct port version of the S-HSV. Designed to fit under the hood and use your stock tank (or you can get a tank from us). We wanted to design a direct port kit that was simple to install, be very clean to install and most of all offer the highest possible performance.

* Registered users of the site do not see these ads.

djosrs · 09-22-2007, 07:53 PM

Heard anything about the AEM?

03_Impreza_Al · 03-02-2008, 04:30 AM

review on Labontes setup?

WRXEcho · 05-04-2009, 05:03 AM

Anyone notice that the "new" Perrin PWI-2 kit is the same as the Turbonetics kit on the first page?

frostyT · 05-30-2009, 05:04 PM

^very old thread^

AEM has had a system for a while now; it'd probably be worth your time to put it in the list.

Richard L · 05-30-2009, 06:24 PM

Thank for the reminder.... Done!

AEM and Labonte added.

grayssti · 07-09-2009, 10:14 PM

Hey guys just bought a hydramist kit it is brand new i do not have a hydra ems ecu to make this work. I got a hell of a deal on this kit and want to use it what are my options on making it work. I will be getting tuned with ecutek or opensource. Any info on this matter will be greatly appreciated. I think i need a different controller but i do not know what the best one is to buy thanks alot guys ryan

Trierry09 · 12-05-2009, 10:50 AM

I have put the failsafe details on each of the WI kit manufacturers, re: "whose, who, what...." post.

This thread deal mainly with different kinds of failsafes. Some failsafe is more safer than others. If you can think of any other safe way to detect WI failure, please contribute - I will put them in on the first post.

I am trying to urge people to consider the importance and effectiveness of a failsafe system before tuning your engine too aggressively.

Richard

Coolingmist · 12-05-2009, 11:05 AM

Since this thread has not been updated I need to make some changes.

first, SMC and ENGINERUNUP have both closed down so they should be deleted. Our info is all out of date. I have made changes below. Please update.

Coolingmist
Location: Atlanta (Norcross), Georgia, USA.
Capabilities: Progressive, Static flow – single or dual stage
Electronic Controller: Digital 52 MM "all in one" boost guage, failsafe, progressive controller and flow gauge. Injection based on boost, MAF or boost and MAF.
Chemical compatibility: Water, 100% Methanol safe (EPDM Seals)
Failsafe: CMGS progressive controller has built in flow based failsafe. Detect low flow, high flow, out of fluid/hardware failure and flowing when should not be. Normally close or normally open output.
Price range: US$249.95 to $625
Warranty: 1 Year Warranty
URL: www.coolingmist.com
EMAIL: [email protected]

downpipe12 · 12-05-2009, 12:24 PM

Good points. But maybe SMC should be changed to something like "open for repairs only" so any SMC users who, as of yet, aren't aware of the situation, would still have to option to go to Steve for help.

SnowTech · 12-10-2009, 03:05 PM

Product Update to cover the last few years or so:

Snow Performance
Location: Woodland Park, Colorado, USA.
Capabilities: Multi-stage progressive, simultaneous injector duty cycle and boost based injection. Basic boost, MAF, and vacuum controlled injection systems as well. Non-progressive boost based injection also available.
Pump: Aquatec featuring multiple high temp/pressure features, double seals, etc.
Chemical compatibility: Any ratio of water and methanol.
Failsafe: Flow based, adjustable minimum flow and sample time, and progressive flow based volatge output.
Price range: 304.00-729.00
Warranty: Standard 2 year on all systems, optional Lifetime.
URL: http://www.snowperformance.net
EMAIL: [email protected]

Richard L · 12-10-2009, 04:06 PM

all updated !

Dunkinuts · 05-04-2010, 10:44 AM

What about CryO2?

Richard L · 02-23-2014, 08:20 AM

New updates: post #1

Richard

Aquamist · 02-23-2014, 11:01 AM

The contents in the first post has been updated today.

Richard L · 02-25-2014, 05:47 PM

The contents in the first post has been updated today again. Comprehensively.

2015 Wrexxxx · 02-13-2018, 07:34 PM

hgghghhg

stompinstu · 08-14-2021, 02:52 AM

Hoping for an update!

08-19-2007, 04:46 PM	#26
Coolingmist Former Vendor Member#: 67024 Join Date: Jul 2004 Location: Atlanta, GA Vehicle: 2009 BMW 135 I space grey	Coolingmist has release a direct port version of the S-HSV. Designed to fit under the hood and use your stock tank (or you can get a tank from us). We wanted to design a direct port kit that was simple to install, be very clean to install and most of all offer the highest possible performance. * Registered users of the site do not see these ads. Last edited by Coolingmist; 12-05-2009 at 11:08 AM.

05-04-2009, 05:03 AM	#29
WRXEcho Scooby Newbie Member#: 96372 Join Date: Sep 2005 Chapter/Region: MWSOC Location: Mpls, MN Vehicle: 2002 WRX Wagon 4EAT PSM	Perrin PWI-2/Turbonetics Anyone notice that the "new" Perrin PWI-2 kit is the same as the Turbonetics kit on the first page?

07-09-2009, 10:14 PM	#32
grayssti Scooby Newbie Member#: 162983 Join Date: Oct 2007 Chapter/Region: Tri-State Location: ohio Vehicle: 04 sti blue	hydramist Hey guys just bought a hydramist kit it is brand new i do not have a hydra ems ecu to make this work. I got a hell of a deal on this kit and want to use it what are my options on making it work. I will be getting tuned with ecutek or opensource. Any info on this matter will be greatly appreciated. I think i need a different controller but i do not know what the best one is to buy thanks alot guys ryan

12-05-2009, 10:50 AM	#33
Trierry09 * Banned * Member#: 225644 Join Date: Oct 2009 Chapter/Region: AKIC Location: Germany Vehicle: Trie http://tierussi Trierry09	Whose who what and where I have put the failsafe details on each of the WI kit manufacturers, re: "whose, who, what...." post. This thread deal mainly with different kinds of failsafes. Some failsafe is more safer than others. If you can think of any other safe way to detect WI failure, please contribute - I will put them in on the first post. I am trying to urge people to consider the importance and effectiveness of a failsafe system before tuning your engine too aggressively. Richard

02-23-2014, 08:20 AM	#39
Richard L Scooby Newbie Member#: 85153 Join Date: Apr 2005 Location: Sussex England Vehicle: 2004 Citroen Picasso Silver	New updates: post #1 Richard Last edited by Richard L; 02-23-2014 at 11:03 AM.

09-22-2007, 07:53 PM	#27
djosrs Scooby Specialist Member#: 101730 Join Date: Nov 2005 Chapter/Region: South East Location: Hoover, AL Vehicle: 02 WRX Stage III+ PPG Reppin!	Heard anything about the AEM?

03-02-2008, 04:30 AM	#28
03_Impreza_Al Scooby Newbie Member#: 146606 Join Date: Apr 2007 Chapter/Region: BAIC	review on Labontes setup?

05-30-2009, 05:04 PM	#30
frostyT Scooby Newbie Member#: 145416 Join Date: Apr 2007 Chapter/Region: BAIC Location: South Bay Area, CA Vehicle: 2006 vf39 WRX TR	^very old thread^ AEM has had a system for a while now; it'd probably be worth your time to put it in the list.

05-30-2009, 06:24 PM	#31
Richard L Scooby Newbie Member#: 85153 Join Date: Apr 2005 Location: Sussex England Vehicle: 2004 Citroen Picasso Silver	Thank for the reminder.... Done! AEM and Labonte added.

12-05-2009, 11:05 AM	#34
Coolingmist Former Vendor Member#: 67024 Join Date: Jul 2004 Location: Atlanta, GA Vehicle: 2009 BMW 135 I space grey	Since this thread has not been updated I need to make some changes. first, SMC and ENGINERUNUP have both closed down so they should be deleted. Our info is all out of date. I have made changes below. Please update. Coolingmist Location: Atlanta (Norcross), Georgia, USA. Capabilities: Progressive, Static flow – single or dual stage Electronic Controller: Digital 52 MM "all in one" boost guage, failsafe, progressive controller and flow gauge. Injection based on boost, MAF or boost and MAF. Chemical compatibility: Water, 100% Methanol safe (EPDM Seals) Failsafe: CMGS progressive controller has built in flow based failsafe. Detect low flow, high flow, out of fluid/hardware failure and flowing when should not be. Normally close or normally open output. Price range: US$249.95 to $625 Warranty: 1 Year Warranty URL: www.coolingmist.com EMAIL: [email protected]

12-05-2009, 12:24 PM	#35
downpipe12 Scooby Specialist Member#: 212666 Join Date: May 2009 Chapter/Region: Tri-State Location: Rocky Point Vehicle: 2002 WRX Wagon, Black, EVOIII16G+Meth	Good points. But maybe SMC should be changed to something like "open for repairs only" so any SMC users who, as of yet, aren't aware of the situation, would still have to option to go to Steve for help.

12-10-2009, 03:05 PM	#36
SnowTech Former Vendor Member#: 160427 Join Date: Sep 2007	Product Update to cover the last few years or so: Snow Performance Location: Woodland Park, Colorado, USA. Capabilities: Multi-stage progressive, simultaneous injector duty cycle and boost based injection. Basic boost, MAF, and vacuum controlled injection systems as well. Non-progressive boost based injection also available. Pump: Aquatec featuring multiple high temp/pressure features, double seals, etc. Chemical compatibility: Any ratio of water and methanol. Failsafe: Flow based, adjustable minimum flow and sample time, and progressive flow based volatge output. Price range: 304.00-729.00 Warranty: Standard 2 year on all systems, optional Lifetime. URL: http://www.snowperformance.net EMAIL: [email protected]

12-10-2009, 04:06 PM	#37
Richard L Scooby Newbie Member#: 85153 Join Date: Apr 2005 Location: Sussex England Vehicle: 2004 Citroen Picasso Silver	all updated !

05-04-2010, 10:44 AM	#38
Dunkinuts Scooby Newbie Member#: 228627 Join Date: Nov 2009 Chapter/Region: MAIC Location: SOMD Vehicle: 2010 WRX/HB/DGM	What about CryO2?

02-23-2014, 11:01 AM	#40
Aquamist Former Vendor Member#: 110029 Join Date: Mar 2006 Location: Sussex, England Vehicle: 2004 Citroen Picasso Silver	The contents in the first post has been updated today. Last edited by Aquamist; 02-26-2014 at 07:27 AM.

02-25-2014, 05:47 PM	#41
Richard L Scooby Newbie Member#: 85153 Join Date: Apr 2005 Location: Sussex England Vehicle: 2004 Citroen Picasso Silver	The contents in the first post has been updated today again. Comprehensively.

02-13-2018, 07:34 PM	#42
2015 Wrexxxx * Banned * Member#: 482102 Join Date: Feb 2018	ghhgghgh hgghghhg

08-14-2021, 02:52 AM	#43
stompinstu Scooby Newbie Member#: 189330 Join Date: Sep 2008 Chapter/Region: RMIC Location: Fresno/Idaho Falls/St George Vehicle: 2008 Impreza STI White	Hoping for an update!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UFC - Who/What/When/Where	tora	Vancouver Impreza Club Forum -- VIC	39	04-23-2009 02:24 PM
Need inexpensive rims and winter tires for STI, what and where to buy ?	jaytone	STi Forum Archive	17	09-06-2003 06:45 PM
Fender Rolling... who can and where?	IMPREZA619	Southern California Impreza Club Forum -- SCIC	1	06-05-2003 03:12 PM
Need a new floor jack, what and where can i buy?	Cosworth	General Community	16	01-29-2002 11:16 PM
OK, CONVOY to the autoshow, who what when where	Pipercub	Mid Atlantic Impreza Club -- MAIC	6	02-23-2001 09:41 PM