|
|
|
|
Thread Tools | Display Modes |
03-05-2021, 11:23 AM | #1 |
Scooby Specialist
Member#: 437670
Join Date: Jan 2016
Location: VT
Vehicle:2005 2.5 SC OB |
Definitions for e2zk001a
Just wanted to post these definitions for my car. Romraider.com appears to be not well (hopefully will make a full recovery) but in the past I have lost all of my "custom" definitions by re-installing the latest EcuFlash.
<table name="AF 3 Correction Limits" address="20114" scaling="A/FLearning#1Limits(%)"> </table> <table name="AF 3 Learning Limits" address="20644" scaling="A/FLearning#1Limits(%)"></table> <table name="AF 3 Correction Limits Bamofo" address="21c60" scaling="A/FLearning#1Limits(%)"> </table> <table name="Engine Load Limit B Maximum (RPM)" address="C2EE4"> <table name="Engine Speed" address="C2E98" elements="19"/> </table> <table name="Minimum Active Primary Open Loop Enrichment" address="C8160"> </table> <table type="2D" name="Engine Load Limit B Maximum (RPM) - Multiplier" category="Mass Airflow / Engine Load" storagetype="float" endian="big" sizey="1" userlevel="4" storageaddress="0x888f8"> <scaling units="multiplier" expression="x" to_byte="x" format="0.000000000000" fineincrement="0" coarseincrement="0" /> <table type="Static Y Axis" name="" sizey="1"> <data>Engine Load Limit B Maximum (RPM) - Multiplier</data> </table> <description>Change this value to change the maximum of the Engine Load Limit B Maximum (RPM) table from it's nominal value. By setting this field to twice (x2) of it's nominal value you will increase the cap of the Engine Load Limit B Maximum (RPM) to double it's nomial value.</description> </table> <table name="Knock Correction Advance Max A" address="cf6d4"> <table name="Engine Load" address="cf644" elements="15"/> <table name="Engine Speed" address="cf680" elements="21"/> </table> <table name="Knock Correction Advance Max B" address="cf8a0"> <table name="Engine Load" address="cf810" elements="15"/> <table name="Engine Speed" address="cf84c" elements="21"/> </table> Note: this isnt a valid table for a car without avls, so not quite sure what it is: <table name="Cam Advance Angle A Non-Turbo" address="cd518"> <table name="Engine Load" address="cd49c"/> <table name="Engine Speed" address="cd4c4"/> </table> Note: this isnt a valid table for a car without avls, so not quite sure what it is: <table name="Cam Advance Angle B Non-Turbo" address="cd738"> <table name="Engine Load" address="cd6bc"/> <table name="Engine Speed" address="cd6e4"/> </table> <table name="Target Throttle_Angle_Idle_Airflow_Target_Base_Min" address="d2bd8"> <table name="Engine Speed" address="d2b58"/> <table name="Requested Torque" address="d2b98"/> </table> <table name="AF 3 Correction Limits" address="21c60"> </table> <table type="2D" name="Info Panel Fuel Consumption Correction" category="Fueling - Injectors" storagetype="float" endian="big" sizey="1" userlevel="2" storageaddress="0x0C1B9C"> <scaling units="ESTIMATED Fuel Efficiency Correction" expression="x" to_byte="x" format="0.000" fineincrement=".1" cobarseincrement="1" /> <table type="Static Y Axis" name="" sizey="1"> <data>Fuel Efficiency Correction</data> </table> <description>This is the correction applied to the fuel efficiency calculation to account for injector size change. Adjust this value by the same percentage as used for injector scaling. NewCorrection = CurrentCorrection * (NewInjectorScale / OldInjectorScale)</description> </table> <table name="Primary Open Loop Fueling (Failsafe)" address="cf58c"> <table name="Engine Load" address="cf520" elements="14"/> <table name="Engine Speed" address="cf558" elements="13"/> </table> |
Thread Tools | |
Display Modes | |
|
|