|
|
|
|
Thread Tools | Display Modes |
10-30-2004, 04:02 AM | #1 |
Scooby Newbie
Member#: 45650
Join Date: Oct 2003
Chapter/Region:
AKIC
Location: Anchorage, AK
Vehicle:2015 WRX Limited DGM |
Clutch Master Cylinder
Is this located on the drivers side perhaps? And is there any openings that something could fall into the bell housing and cause trouble? Sounds like a bolt fell into mine or something, call me a dumbass but we were working on my car and we left the intercooler unbolted, the bolts have been sitting on it for a couple days i guess and now it sounds like something fell into something, i dunno what to do, any ideas? ohh yeah and it only rattles when the clutch is engaged/out......
* Registered users of the site do not see these ads.
|
10-30-2004, 11:02 PM | #2 |
Scooby Newbie
Member#: 45650
Join Date: Oct 2003
Chapter/Region:
AKIC
Location: Anchorage, AK
Vehicle:2015 WRX Limited DGM |
sounds like its coming from right underneath the intercooler, i dont wanna try driving it like this, its a really loud/terrible noise, what the hell is it! any help would be appreciated.
Thanks ~Will~ |
11-01-2004, 02:17 PM | #3 |
Scooby Specialist
Member#: 9898
Join Date: Sep 2001
Chapter/Region:
MAIC
Location: VA near MD
Vehicle:2002 WRX Water Injected Blue |
There is a rubber tab that you can pull off and have access to the FW teeth et-al on the bell housing, but I kant visualize what you have going on.
PM me your e-mail and I can show you pictures of the area and you can maybe diagnose yourself. |
11-01-2004, 02:46 PM | #4 |
Scooby Specialist
Member#: 34832
Join Date: Apr 2003
Chapter/Region:
Tri-State
Location: was once a nut like me.
Vehicle:1989 M3 White |
unless you took the starter motor out or the tranny out, i dont think you can get anything into the flywheel clutch area.. what all did you have OFF of the car?
|
11-01-2004, 05:56 PM | #5 |
Scooby Specialist
Member#: 9898
Join Date: Sep 2001
Chapter/Region:
MAIC
Location: VA near MD
Vehicle:2002 WRX Water Injected Blue |
I can take the release lever seal off just by opening the hood of the car.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: Metal tube that goes from clutch master cylinder to slave cylinder | 2slofouru | Private 'Wanted' Classifieds | 2 | 04-05-2009 10:08 AM |
WRX pedal box, clutch master cylinder, clutch lines, RS exhaust, axles, and more! | 2.5 Blue Roo | Private 'For Sale' Classifieds | 13 | 10-04-2005 10:48 PM |
WTB:hydraulic clutch parts:99-01 rs pedal box, clutch master cylinder, starter | petawabit | Private 'Wanted' Classifieds | 1 | 09-02-2005 04:52 PM |
First it's radiator leaking, then clutch master cylinder resorvoir leaking, and then. | davidm_sh | Warranty Issues & SOA Problems | 1 | 03-24-2002 01:43 AM |
Clutch master cylinder with WRX gearbox | scooby5 | Normally Aspirated Powertrain | 0 | 02-27-2001 07:28 AM |