I want to wire up an 08-14 WRX HID leveler switch WITH a full HID headlight harness.

[Markuli]

Hi all,

So I've read through a few posts that vaguely touch on wiring up the Limited/ STI headlight level switch (best one I found that still has pics was actually on the GT86 forums: https://www.ft86club.com/forums/showthread.php?t=86120 . I plan to follow this info but I have one question - If I also have the complete STI headlight harness, and plug that into my dashboard fuse box, could I just wire my leveler switch to the B360 plug per the attached diagram and be good to go? F109 in that diagram is on my new harness. Basic logic tells me I shouldn't have a problem but I'm sure someone here knows more.

Wiring Diagram : https://imgur.com/a/3D4KN4q

EDIT: STI headlight harness plugs into a connector under the engine compartment fuse box. If I follow the GT86 instructions all I have to do is wire in the Violet signal wire o B360 and tap power/ grounds from under the dash.

* Registered users of the site do not see these ads.