|
|
|
|
Thread Tools | Display Modes |
05-25-2020, 12:12 PM | #1 |
Scooby Newbie
Member#: 199691
Join Date: Jan 2009
Chapter/Region:
South East
Location: ETown TN
Vehicle:04 Forester XT Black |
EJ205 Dbw avcs
Over long weekend ran across the Forester XT 205. From what I can tell it’s avcs and dbw. Next issue is the cam position sensors. Some of the pictures I can see one behind the left intake cam sprocket but do they also use 2 on the rear of the intake cams like the USDM sti/xt.
I ran across https://sirhclabs.com/product/vr-to-...sor-converter/ They claim it should work as long as use the same pattern. I found the hall 3 wire uses a 180 pattern but not sure if the 205 does also.
* Registered users of the site do not see these ads.
|
Thread Tools | |
Display Modes | |
|
|