Welcome to the North American Subaru Impreza Owners Club Saturday May 8, 2021
Home Forums Images WikiNASIOC Products Store Modifications Upgrade Garage
NASIOC
Go Back   NASIOC > NASIOC Technical > Engine Management & Tuning > Open Source Reflashes

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.







* As an Amazon Associate I earn from qualifying purchases. 
* Registered users of the site do not see these ads. 
Reply
 
Thread Tools Display Modes
Old 03-05-2021, 11:23 AM   #1
pcampbell
Scooby Specialist
 
Member#: 437670
Join Date: Jan 2016
Location: VT
Vehicle:
2005 2.5 SC OB

Default Definitions for e2zk001a

Just wanted to post these definitions for my car. Romraider.com appears to be not well (hopefully will make a full recovery) but in the past I have lost all of my "custom" definitions by re-installing the latest EcuFlash.

<table name="AF 3 Correction Limits" address="20114" scaling="A/FLearning#1Limits(%)"> </table>

<table name="AF 3 Learning Limits" address="20644" scaling="A/FLearning#1Limits(%)"></table>

<table name="AF 3 Correction Limits Bamofo" address="21c60" scaling="A/FLearning#1Limits(%)">
</table>

<table name="Engine Load Limit B Maximum (RPM)" address="C2EE4">
<table name="Engine Speed" address="C2E98" elements="19"/>
</table>


<table name="Minimum Active Primary Open Loop Enrichment" address="C8160">
</table>




<table type="2D" name="Engine Load Limit B Maximum (RPM) - Multiplier" category="Mass Airflow / Engine Load" storagetype="float" endian="big" sizey="1" userlevel="4"

storageaddress="0x888f8">
<scaling units="multiplier" expression="x" to_byte="x" format="0.000000000000" fineincrement="0" coarseincrement="0" />
<table type="Static Y Axis" name="" sizey="1">
<data>Engine Load Limit B Maximum (RPM) - Multiplier</data>
</table>
<description>Change this value to change the maximum of the Engine Load Limit B Maximum (RPM) table from it's nominal value. By setting this field to twice (x2) of

it's nominal value you will increase the cap of the Engine Load Limit B Maximum (RPM) to double it's nomial value.</description>
</table>



<table name="Knock Correction Advance Max A" address="cf6d4">
<table name="Engine Load" address="cf644" elements="15"/>
<table name="Engine

Speed" address="cf680" elements="21"/>
</table>



<table name="Knock Correction Advance Max B" address="cf8a0">
<table name="Engine Load" address="cf810" elements="15"/>
<table name="Engine

Speed" address="cf84c" elements="21"/>
</table>


Note: this isnt a valid table for a car without avls, so not quite sure what it is:
<table name="Cam Advance Angle A Non-Turbo" address="cd518">
<table name="Engine Load" address="cd49c"/>
<table name="Engine Speed"

address="cd4c4"/>
</table>

Note: this isnt a valid table for a car without avls, so not quite sure what it is:
<table name="Cam Advance Angle B Non-Turbo" address="cd738">
<table name="Engine Load" address="cd6bc"/>


<table name="Engine Speed" address="cd6e4"/>
</table>



<table name="Target Throttle_Angle_Idle_Airflow_Target_Base_Min" address="d2bd8">
<table name="Engine Speed" address="d2b58"/>
<table

name="Requested Torque" address="d2b98"/>
</table>

<table name="AF 3 Correction Limits" address="21c60">
</table>




<table type="2D" name="Info Panel Fuel Consumption Correction" category="Fueling - Injectors" storagetype="float" endian="big" sizey="1" userlevel="2"

storageaddress="0x0C1B9C">
<scaling units="ESTIMATED Fuel Efficiency Correction" expression="x" to_byte="x" format="0.000" fineincrement=".1" cobarseincrement="1" />
<table type="Static Y Axis" name="" sizey="1">
<data>Fuel Efficiency Correction</data>
</table>
<description>This is the correction applied to the fuel efficiency calculation to account for injector size change. Adjust this value by the same percentage as used for

injector scaling. NewCorrection = CurrentCorrection * (NewInjectorScale / OldInjectorScale)</description>
</table>


<table name="Primary Open Loop Fueling (Failsafe)" address="cf58c">
<table name="Engine Load" address="cf520" elements="14"/>
<table

name="Engine Speed" address="cf558" elements="13"/>
</table>
* Registered users of the site do not see these ads.
pcampbell is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 04:01 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2021 Axivo Inc.
Copyright ©1999 - 2019, North American Subaru Impreza Owners Club, Inc.

As an Amazon Associate I earn from qualifying purchases.