TurboXS Stage 1 Unichip question

andygold · 11-08-2001, 04:37 PM

I've bothered Mark, way too many times recently, so I figured I'd throw this question up here.

When I installed the blue restrictor hose, I connected it between the turbo housing and the Tee, not between the Tee and that gold colored can shaped thing (please no flames

)that looks like some sort of vacuum controlled actuator. Is this correct? Also, there was an arrow on the restrictor. Did it matter which way the arrow pointed? I could not discern any difference from looking at it's insides.

Thanx,

Andy

* Registered users of the site do not see these ads.

TurboRex · 11-08-2001, 04:47 PM

Sounds like you installed the restrictor correctly. The direction does not matter.

Good luck,

Greg

SGOSWRX · 11-08-2001, 04:52 PM

There is a post in here that has the entire TurboXS stage1 installation done for you. Pictures included. I printed it becaust I am waiting for mine.

I can hardly contain myself.

11-08-2001, 04:37 PM	#1
andygold Scooby Newbie Member#: 7347 Join Date: Jun 2001 Location: North Country, New York Vehicle: 2002 Impreza WRX WR Blue	TurboXS Stage 1 Unichip question I've bothered Mark, way too many times recently, so I figured I'd throw this question up here. When I installed the blue restrictor hose, I connected it between the turbo housing and the Tee, not between the Tee and that gold colored can shaped thing (please no flames )that looks like some sort of vacuum controlled actuator. Is this correct? Also, there was an arrow on the restrictor. Did it matter which way the arrow pointed? I could not discern any difference from looking at it's insides. Thanx, Andy * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS - IA: TurboXS Stage 1 Unichip for 2002 WRX	mx270a	Engine/Power/Exhaust	4	01-28-2007 01:38 AM
TurboXS Stage 1 Unichip	rlim6	Private 'For Sale' Classifieds	6	12-29-2003 03:04 AM
Turboxs stage 1 unichip+aem intake...is it okay?	SiLu	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	4	08-25-2002 04:29 AM
TurboXS Stage 1 Unichip experiences and questions	andygold	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	2	11-23-2001 03:18 PM
The TurboXS Stage 1 Unichip and Me	gossamer_monster	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	41	08-10-2001 02:34 PM

11-08-2001, 04:47 PM	#2
TurboRex Scooby Specialist Member#: 8635 Join Date: Jul 2001 Location: Texas Vehicle: 04 STI, 07 FXT	Sounds like you installed the restrictor correctly. The direction does not matter. Good luck, Greg

11-08-2001, 04:52 PM	#3
SGOSWRX Scooby Specialist Member#: 10921 Join Date: Oct 2001 Location: S.W. Florida Vehicle: 04 04 STi 12.8 @ 105 mph	There is a post in here that has the entire TurboXS stage1 installation done for you. Pictures included. I printed it becaust I am waiting for mine. I can hardly contain myself.