|
|
|
|
Thread Tools | Display Modes |
12-19-2012, 04:57 PM | #1 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
SOLD 2000 2.5 RS, Built, swapped and gorgeous
SOLD
Craig's 2000 2.5RS. car was purchased in 2009 from a private party who had attempted an engine build and a turbo conversion on the car at 16,000 miles. The car had been sitting for quite a few years and had 1/4" of dust on her. With only 16k on it, the car was pretty flawless with the exception of some of the work that was done. We gutted the engine and discovered all the things they had done wrong. We also removed the turbo kit and ran the car NA on the factory ecu for about... 6 months. The car was making over 200hp, but Craig had been in too many fast Subarus to keep it that way. The car now has about 45k miles on it. The cluster is out of my 2001 RS because Prodriven Auto smoked the factory cluster for this car when he was doing the red conversion. Since I had a JDM cluster in my car, my stock cluster was left over. Unfortunately it had 76k miles on it when craig got it from me. So indicated mileage is over twice the actual chassis mileage. However, none of the wear items are factory anymore so it's kinda moot. Regardless, it has been garaged it's entire life. The original owner kept it in a garage and so have we. The current setup: Transmission: *2005 STi transmission with 07 STi 1st through 4th and Spec B 5th and 6th. All new synchros and bearings. RPM on the freeway is around 2500rpm at 60mph. *The DCCD was removed and a viscous center from the spec B was installed. this is a great mod for swapped cars as you don't have to worry about DCCD controllers and snow performance is superior. *The front diff is still the LSD that came in the 05 STi. *Rear End is R180 from an 07 STi. Hubs are 04 STi 5x100 with brembos that have been rebuilt and refinished. Project Mu Break pads StopTech Slotted Rotors Engine: New 2.5L EJ257 with Forged JE Pistons and MPS Rods ACL Race Bearings Full blueprint and balance Lightly ported S20 heads with CNC combustion chambers to match STi Kelford 199-E (272) cams Supertech dual spring valve springs Ferrea Stainless Steel Valves- STD Size MPS 10mm Oil Pump KillerBee Oil pan, pickup and windage tray combo Engine will have less than 1k miles on it Forced Induction and Exhaust: Coated AP Equal Length Headers Invidia Q300 Stainless Steel Exhaust Modified and "black velvet" Coated Perrin Piping GTX3071R turbocharger with .82 housing Precision EWG vented to atmosphere via extended dump tube (exits by rear diff) Custom FMIC with Light Grey powdercoated pipes (they look white in the pictures, but they're not) Tial Q BOV Powder coated Intake manifold Powder coated and ported Throttle Body Powder coated custom TGVs MPS -6AN Fuel Rails with ID1000 fuel Injectors Aeromotive FPR -6AN Aeromotive Stealth Fuel pump (in tank) Group N engine mounts Group N trans mount Group N Pitch stop Wiring is an iWire merge and engine runs off a factory EJ205 ecu with Speed Density or via AEM (your call). Car will pass a Washington State Emission scan on the 2L ecu only. Cruise control is functional. Viper 2 way alarm with remote start Suspension: Whiteline End Links Front and Rear Perrin Front and rear sway bars Whiteline Roll Center Kit Whiteline Anti-lift kit Racing Logic coilovers JDM Carbon Fiber and Titanium Front Strut tower brace Whiteline subframe lockdown kit Wheels are 5 spoke OZ Racing 18x8" 5x100. They are in perfect condition. No curbs, no chipping clear coat, no scratches, nothing. They might have a little dirt on them. Tires are Direzza Star Spec 225/40R18 (80% life left) Exterior: JDM rear bumper and beam JDM rear spats JDM V6 grill JDM V6 Front Lip JDM Front bumper beam Tinted Tails and 3rd brake light Body matched side skirts 35% Tint on front windows 20% everywhere else Smoked Side Markers Clear Corners Clear Bumper Blinkers Interior: JDM V4 WRX Front Seats STi floor mats Red Lighting conversion on climate control, cluster and gauges OEM Dash Pod modified for Prosport gauges (boost, egt, oil pressure) Autometer Pillar Pod with LC1 WBO2 DB Gauge and Oil Temperature Eclipse Double DIN Nav Unit MTX Amplifiers (4 channel and 2 channel) MTX Components in Front MTX 6.5's on rear deck MTX 12" Sub in custom fiberglass box in trunk. Escort X50 detector with molded mute switch in center console WC Lathwerks Custom Black Shift knob with MPS Logo Kartboy short shifter Kartboy and TiC bushings in all shifting points I'm sure there are a lot of things I'm forgetting as there isn't much we didn't do. The car is a complete build that is immaculate in condition. There are no spots on the seats. The spots in the pictures were falling rain drops when we were taking them. We realize our asking price is way over that of blue book. However, this car brings together all the best parts of Subaru. Drive by cable, 2.5L of displacment, 6 speed, best body style, coupe, JDM seats, GTX Turbo etc. The right buyer will recognize the value of this Coupe and pay what we are asking. If that isn't you, please don't waste time criticizing. We are not in a hurry to sell, so low ballers won't be entertained. Why is it for sale? Between Craig and I, we have too many Subarus. Asking $24,500 Thanks for reading, Dominic Acia Maxwell Power Services 3923 88th St NE Suite AB Marysville, WA 98270 360-691-9674 Now for pictures: This car wasn't cleaned prior to taking them. It's always kept this clean. It has been garaged it's entire life.
* Registered users of the site do not see these ads.
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] Last edited by Maxwell Power; 04-05-2013 at 12:17 PM. |
12-19-2012, 05:10 PM | #2 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
No power figures as the engine is brand new. Once it gets fully broken in it'll go back on the dyno and get the full tune.
Should be an easy 425whp-450whp on pump gas.
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
12-19-2012, 10:46 PM | #4 |
Scooby Specialist
Member Sales Rating: (17)
Member#: 259948
Join Date: Oct 2010
Chapter/Region:
W. Canada
Location: Regina, Canada
Vehicle:MPS 510 whp GTX35R Long Rod Motor |
Free bump,
After seeing this car close up it really is immaculate. Not a mark on it and it truly is one of the fastest cars I have had the pleasure to ride in (on old motor). I'm sure Craig is sad to see it go. Easily worth the $$$. Glws Alex |
12-28-2012, 10:54 PM | #8 |
Scooby Specialist
Member Sales Rating: (2)
Member#: 21158
Join Date: Jul 2002
Location: Hanging in NY
Vehicle:94 FWD 2.5 Acardia Green |
We'll have to see what the spring brings and if Im going to need a car or not. If I do im putting my RS up for sale and flying back out West ;-)
goodluck with the sale though- hopefully its around if it comes time for me to buy though |
12-29-2012, 12:13 PM | #9 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
Would love to see you in it!
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
12-29-2012, 12:15 PM | #10 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
We keep getting people asking us about the car being repainted and rust. The car has factory paint with the exceptions of the added jdm components which have new paint. The match is practically perfect. The car has no rust. It has been garage kept all its life. Yes it has been driven in the rain, but never in snow since we got it.
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
01-07-2013, 05:27 PM | #11 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
If I change the Brembos to regular gold Brembos does that seem like a better option for a potential buyer?
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
01-08-2013, 08:19 PM | #12 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
Break in tune:
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
04-05-2013, 12:17 PM | #15 |
Former Vendor
Vendor Sales Rating: (16)
Member#: 190729
Join Date: Oct 2008
Chapter/Region:
NWIC
Location: Marysville, WA
|
sorry. Sold.
__________________
[SIZE=3][COLOR=red][I]Engine builds * Custom Fabrication * Albins Gearsets* DomTunes. [SIZE=1][COLOR=magenta]PBFL[/COLOR][/SIZE][/I] [SIZE=2][COLOR=black] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [SIZE=2][COLOR=black]Hydra, AEM, COBB, Open Source, JE, Tial, Crower, Garrett, ARP, ATP, Racing Brake, Ferrea, Perrin, To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/COLOR][/SIZE] [/COLOR][/SIZE] |
Thread Tools | |
Display Modes | |
|
|