|
|
|
|
Thread Tools | Display Modes |
01-02-2018, 01:36 AM | #1 |
Former Vendor
Vendor Sales Rating: (47)
Member#: 173316
Join Date: Mar 2008
Chapter/Region:
VIC
Location: [email protected]
Vehicle:'18 STi Type RA White |
Cooling System Upgrades at Dales Motorsport
Cooling System Upgrades at Dales Motorsport Less than 40-percent of the heat generated through combustion gets turned into horsepower. Over 60-percent of the heat from the combustion of the air and fuel gets rejected out your exhaust pipe and through your vehicle's cooling system. In simple terms, if your car originally produced 200 horsepower, the factory cooling system and exhaust system will reject about 300 horsepower worth of heat. When you turbocharge your vehicle and it is producing twice as much power, the cooling system and exhaust system now must reject 600 horsepower worth of heat. Thus, it is easy to see how easy it is to max out the capabilities of the factory cooling system. There are many cooling system upgrades to suit your driving style. Upgrades Below Oil Coolers Radiator Caps Radiator Fans Radiator Hoses Radiators Thermostats Transmission Coolers Water Pumps Go direct to the cooling system upgrade page- Click HERE All pricing on our site are in Canadian currency .
* Registered users of the site do not see these ads.
__________________
[CENTER] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [B][I][COLOR="Red"] "We do pricing a little differently. Every price you see includes the shipping cost to our office(Surrey, BC), duties and exchange rate . This creates a built in cost savings, no hidden fees, and less hassles. The best part is we still have a price match guarantee!"[/COLOR][/I] [/B] [COLOR=black]Service Center: 604-530-9160 Toll Free 1 (855) 214-2670[/COLOR] [COLOR=black]Email- [/COLOR] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/CENTER] Last edited by dalesmotorsport; 01-03-2018 at 03:18 PM. |
01-02-2018, 08:53 PM | #2 |
Former Vendor
Vendor Sales Rating: (47)
Member#: 173316
Join Date: Mar 2008
Chapter/Region:
VIC
Location: [email protected]
Vehicle:'18 STi Type RA White |
JDM STi with a new GrimmSpeed Air Oil Separator
An Air/Oil Separator has one job, remove the oil from the engine ventilation system so the oil does not get sent through the intake system. The GrimmSpeed Subaru Air/Oil Separator has a unique patent pending design that allows you to maintain your PCV Valve while separating the oil out of the crankcase and head ventilation air! Our AOS will allow your engine to run more efficiently due to the separation of oil from the intake system. When there is oil in your system, the result is 1) reduced fuel octane 2) higher chance of engine knock(detonation) 3) worse emissions 4) higher oil consumption. Our Subaru Air/Oil Separator will help all of these problems. In typical GrimmSpeed fashion, we have made a very compact unit that packs a powerful punch(and looks good while doing it)! No more having to check/empty your catch can and refilling your oil. The GrimmSpeed™ AOS coalesces oil without using a mesh media. Mesh medias can cause contaminates to collect and build up resulting in possible sludge. Our AOS is self maintained so you can just sit back, stop worrying, and enjoy driving your car!
__________________
[CENTER] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [B][I][COLOR="Red"] "We do pricing a little differently. Every price you see includes the shipping cost to our office(Surrey, BC), duties and exchange rate . This creates a built in cost savings, no hidden fees, and less hassles. The best part is we still have a price match guarantee!"[/COLOR][/I] [/B] [COLOR=black]Service Center: 604-530-9160 Toll Free 1 (855) 214-2670[/COLOR] [COLOR=black]Email- [/COLOR] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/CENTER] |
01-02-2018, 09:06 PM | #3 |
Former Vendor
Vendor Sales Rating: (47)
Member#: 173316
Join Date: Mar 2008
Chapter/Region:
VIC
Location: [email protected]
Vehicle:'18 STi Type RA White |
Subaru BRZ in for a PERRIN Oil Cooler
WHY DO I WANT THIS? In racing conditions engine oil temperature skyrockets. This causes decreased engine performance and reduces the oil’s ability to properly lubricate. A well designed engine oil cooling system like the PERRIN Oil Cooler Kit will help keep temperatures within the desired temperature range, thus maintaining performance and prolonging engine life. HEAT EXCHANGER Each PERRIN oil cooler uses a Setrab core which maximizes heat dissipation without pressure build-up. Oil-ways are interspaced with airway corrugations providing optimum heat transfer, while the oil passages use “turbulators” to break down boundary layer effects in the oil flow. Setrab Oil Coolers employ an in-line turbulator to gently stir the fluid being cooled, thereby ensuring that the fluid has exposure to the entire internal surface area of the oil cooler with the least pressure lost. The turbulators are fully brazed to the entire internal length of the tube resulting in zero heat transfer barrier and high strength. INTEGRATED THERMOSTAT The PERRIN Performance filter adapter features an integrated 85°C (185°F) thermostat. This means oil will not start flowing through the oil cooler until oil temps reach an optimum temperature of 85°C. In addition to the OEM oil filter from Subaru, we include a PERRIN spacer which allows for easier installation of the thermostat-filter assembly. MOUNTING BRACKETS The PERRIN Oil Cooler comes with custom brackets that allow the oil cooler core to mount directly to existing holes in the OEM core support of your vehicle. Made from CNC machined 6061 T6 aluminum, the brackets look sleek and stylish while blending seamlessly behind your bumper. PREASSEMBLED HOSES PERRIN’s STI/WRX oil cooler kit uses lightweight Aeroquip brand -10 hose that is rated for 250psi and 300°F continuous temperature. Each hose consists of anodized -10 push-lock type aluminum hose ends. These fittings are designed to fit without the need for clamps, but we take the extra step and add a clamp ensuring they will never come apart. Unlike other kits that make you assemble your hoses, PERRIN preassembles them for you! Contact [email protected]
__________________
[CENTER] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [B][I][COLOR="Red"] "We do pricing a little differently. Every price you see includes the shipping cost to our office(Surrey, BC), duties and exchange rate . This creates a built in cost savings, no hidden fees, and less hassles. The best part is we still have a price match guarantee!"[/COLOR][/I] [/B] [COLOR=black]Service Center: 604-530-9160 Toll Free 1 (855) 214-2670[/COLOR] [COLOR=black]Email- [/COLOR] To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. [/CENTER] |
Thread Tools | |
Display Modes | |
|
|