Welcome to the North American Subaru Impreza Owners Club Thursday March 28, 2024
Home Forums Images WikiNASIOC Products Store Modifications Upgrade Garage
NASIOC
Go Back   NASIOC > NASIOC Subaru Models > Baja Forum

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.







* As an Amazon Associate I earn from qualifying purchases. 
* Registered users of the site do not see these ads. 
Reply
 
Thread Tools Display Modes
Old 03-23-2019, 11:55 PM   #276
AdkBaja
Scooby Newbie
 
Member#: 499461
Join Date: Mar 2019
Location: Union, NJ
Vehicle:
2005 Baja Turbo

Default

TurboXS V2 3" downpipe, catted or catless, fits without modifying the chassis brace, but will need the stock turbo heat shield either removed or cut to fit

Injen bell-mouth downpipe will not fit without modifying the chassis brace to create clearance.
* Registered users of the site do not see these ads.
AdkBaja is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.
Old 03-23-2019, 11:58 PM   #277
ebo03
Scooby Newbie
 
Member#: 111008
Join Date: Mar 2006
Chapter/Region: MAIC
Location: Roanoke, VA
Vehicle:
2011 LGT SSM, 2006
Baja Turbo ABP

Default

Quote:
Originally Posted by SpyrouBaja View Post
looking into replacing seats in my '06 Baja. Anybody selling or have recommendations?
I have a Recaro Speed in my 06. Get a bracket from Planted.
ebo03 is offline   Reply With Quote
Old 03-31-2019, 06:58 AM   #278
Zadok
Scooby Newbie
 
Member#: 38360
Join Date: Jun 2003
Location: Harrisburg, Pa.
Vehicle:
2006 Baja Turbo 5MT
Atlantic Blue Pearl

Default

What JDM grills will fit the Baja? I was thinking the BE/BH would, but I thought someone told me the were different for some reason.
Looking at a JDM Legacy B4 style grill, considering the Baja is getting a Legacy 2.0GT Spec B engine and trans.
Zadok is offline   Reply With Quote
Old 04-01-2019, 08:16 AM   #279
AdkBaja
Scooby Newbie
 
Member#: 499461
Join Date: Mar 2019
Location: Union, NJ
Vehicle:
2005 Baja Turbo

Default

Quote:
Originally Posted by Zadok View Post
What JDM grills will fit the Baja? I was thinking the BE/BH would, but I thought someone told me the were different for some reason.
Looking at a JDM Legacy B4 style grill, considering the Baja is getting a Legacy 2.0GT Spec B engine and trans.
Looks like a B4 grille is what Jared from Jalopnik is running, you can take a look at his article comparing his Baja to the '16 STI or fitment pics.
AdkBaja is offline   Reply With Quote
Old 09-19-2019, 09:50 AM   #280
rsuazopm
Scooby Newbie
 
Member#: 506490
Join Date: Sep 2019
Default 05 Outback (turbo) Engine into a 05 Baja turbo.

I have a 05 turbo Baja with a blown engine, bad brakes, and no exhaust.
I bought a wreaked 05 Outback XT (turbo) as a donor car.
Do you know what parts are interchangable?

QUOTEEE=honda killer;30771021]Upgrading Bajas are a little frustrating, as we all know, because websites/manufactures are not clearly labeling their product as "Baja Compatible". We're forced to do more homework than other, and bounce ideas off others. While that seems fun for other, I find it slows down my work.

I'll start the list, and you reply with updates; then I'll update my main post for quick reference.
Here are some things to get started on:

*******************************Keep in mind the following******************************
If parts are coming off of other Subarus, make sure to list the year and series of vehicle. Also if a part has to be altered to fit, IE trimming; rewiring; welding; or cutting; NOTE IT with a DIY scale of 1-10. Picture are welcome too.
************************************************** *************************************

Top Mount Intercooler (TMIC)
1. USDM STi intercooler (2004-??) Fits a stock Baja turbo with modification to the 90" elbow between the turbo and Y-pipe. The length needs to be changed slightly. Also it requires the Sti or 2.0l wrx bypass valve, Y-pipe, bypass valve vac. line. The bypass valve hose that goes to the intake needs to come from an STI to clear the electronic throttle body. the hoodscoop shroud will no longer fit properly with any larger TMIC.
NOTE: sometimes while in reverse engine rock causes the intercooler to impact the clutch reservoir cap (5MT) a few shims under the mounting tabs where it bolts down will angle the rear up the intercooler up and solve this.

Tumble Generator Valve (TGV)
TGV Deletes
Fuel Injector
Throttle Body
Intake Manifold
Up Pipe
1. 02-07 WRX & STi are compatible, make sure to reinstall the EGT sensor
2. Bosal catless up pipe is a direct bolt on- It is essentially the same as the STI although it may have thicker flanges. Does not have EGT bung so the CEL will have to be turned off at the ECU or the resistor mod. It accepts OEM heat shielding.
Down Pipe
1. Random Technology makes one that is a perfect fit, NO modding (DIY Rating 2)
2. Helix Catless DP requires some cutting to fit (DIY Rating 3)
3. OAKOS Automotive downpipe fits the 5MT Baja turbo with no modification. It clears the brace on the firewall and everything. It is catless and 2.5" diameter.
Brakes
1. Front Brakes: The Baja shares the front brakes with the 2003-2005 WRX. Rotors and brake pads are directly interchangeable.
2006-2007 WRX 4 pots (red) and the older JDM 4 pots (gray) will bolt up (uses existing rotor) but will not clear the OEM wheel choices. Will need different wheels or wheel spacers.
2004 STI Brembo- direct bolt on, needs larger wheels for clearance. (Must be 2004 STi rotors as anything after that will have a different bolt pattern). May need to dust shields behind the rotors.

Rear Brakes- Baja has same rears as the outback H6. So anything pad or rotor listed for the "H6 rear" will bolt right up. There are some decent choices as this is used to be a pipular upgrade for 2.0 WRX guys back in the day.

Fuel Pump
OEM Radio Deck
Driver/Passenger Seat
Steering Wheel
Air Bags
Center Gauge Cluster (RPM, MPH, Temp)
Exhaust Manifold/ Equal or on Equal
Turbo Charger
1. STI turbocharger is a direct bolt on. It will fit the stock intercooler with some creative stretching and wiggling. But swapping in a proper length Y-pipe is best. Of course with the USDM STi intercooler and Y-pipe it is a perfect fit.
Radio Deck
1. Radio Deck- Basically anything Subaru the same year or older will fit the baja. I replaced the OEM 6 disc with a 2004 WRX head unit to add a tape deck. I also think the illumination matches a bit better.
Short Throw Shifter
1. Short throw shifters- anything for a Subaru 5MT (WRX, FXT, LGT) of the same model years will fit the Baja 5MT turbo or non-turbo. Anything from the SPT assembly to Kartboy lever or bushings.
Clutch
1. Clutches- 2004-2005 Baja turbo can use anything intended for a 2002-2005 WRX "pull style" clutch. 2006 Baja T is a "push style" and is compatible with 2006-2007 WRX (I do not know about later models)


Baja friendly websites:
http://www.ezsubaruparts.com
http://www.rallitek.com[/quote]
rsuazopm is offline   Reply With Quote
Old 10-08-2019, 03:34 PM   #281
pawlooo
Scooby Specialist
 
Member#: 123959
Join Date: Aug 2006
Chapter/Region: NESIC
Location: CT
Vehicle:
08 LGT
silver

Default

04 Fxt 5spd Tranny fits 05 Baja
pawlooo is offline   Reply With Quote
Old 03-08-2020, 09:23 PM   #282
Hfourlife
Scooby Newbie
 
Member#: 468431
Join Date: May 2017
Chapter/Region: MAIC
Location: Lock Haven PA
Vehicle:
2005 Baja turbo
White

Default

Quote:
Originally Posted by Zadok View Post
What JDM grills will fit the Baja? I was thinking the BE/BH would, but I thought someone told me the were different for some reason.
Looking at a JDM Legacy B4 style grill, considering the Baja is getting a Legacy 2.0GT Spec B engine and trans.
I’m looking to switching out my grill as well. I think the normal grill vs the outback grill is shorter and leaves a gap
Hfourlife is offline   Reply With Quote
Old 07-09-2020, 03:17 PM   #283
408BAJA
Scooby Newbie
 
Member#: 516569
Join Date: Jul 2020
Default

Anybody replace any of the seats in their Baja yet? I hate these front seats compared to my WRX seats. Has anyone confirmed whether there are any other Subaru seats that will just bolt right up. Also, the rear seats I was considering to swap for the Legacy back seats to give me that middle seat as I struggle without it. Any help is appreciated.
408BAJA is offline   Reply With Quote
Old 07-09-2020, 03:21 PM   #284
408BAJA
Scooby Newbie
 
Member#: 516569
Join Date: Jul 2020
Default

Quote:
Originally Posted by Flowmastered87GL View Post
In general 1993-2007 Impreza or WRX stuff will fit in the front.
1995-2004 Legacy and Outback should fit (unsure of 90-94) the front.
Rear would be closest to a 2000-2004 Legacy or Outback wagon.
YES! This is what I was looking for... Thanks for sharing! I will be shopping now!
408BAJA is offline   Reply With Quote
Old 08-11-2020, 02:08 PM   #285
sethpink86
Scooby Newbie
 
Member#: 517455
Join Date: Aug 2020
Default What mesh grill is interchangeable with the Baja grill?

Quote:
Originally Posted by honda killer View Post
Upgrading Bajas are a little frustrating, as we all know, because websites/manufactures are not clearly labeling their product as "Baja Compatible". We're forced to do more homework than other, and bounce ideas off others. While that seems fun for other, I find it slows down my work.

I'll start the list, and you reply with updates; then I'll update my main post for quick reference.
Here are some things to get started on:

*******************************Keep in mind the following******************************
If parts are coming off of other Subarus, make sure to list the year and series of vehicle. Also if a part has to be altered to fit, IE trimming; rewiring; welding; or cutting; NOTE IT with a DIY scale of 1-10. Picture are welcome too.
************************************************** *************************************

Top Mount Intercooler (TMIC)
1. USDM STi intercooler (2004-??) Fits a stock Baja turbo with modification to the 90" elbow between the turbo and Y-pipe. The length needs to be changed slightly. Also it requires the Sti or 2.0l wrx bypass valve, Y-pipe, bypass valve vac. line. The bypass valve hose that goes to the intake needs to come from an STI to clear the electronic throttle body. the hoodscoop shroud will no longer fit properly with any larger TMIC.
NOTE: sometimes while in reverse engine rock causes the intercooler to impact the clutch reservoir cap (5MT) a few shims under the mounting tabs where it bolts down will angle the rear up the intercooler up and solve this.

Tumble Generator Valve (TGV)
TGV Deletes
Fuel Injector
Throttle Body
Intake Manifold
Up Pipe
1. 02-07 WRX & STi are compatible, make sure to reinstall the EGT sensor
2. Bosal catless up pipe is a direct bolt on- It is essentially the same as the STI although it may have thicker flanges. Does not have EGT bung so the CEL will have to be turned off at the ECU or the resistor mod. It accepts OEM heat shielding.
Down Pipe
1. Random Technology makes one that is a perfect fit, NO modding (DIY Rating 2)
2. Helix Catless DP requires some cutting to fit (DIY Rating 3)
3. OAKOS Automotive downpipe fits the 5MT Baja turbo with no modification. It clears the brace on the firewall and everything. It is catless and 2.5" diameter.
Brakes
1. Front Brakes: The Baja shares the front brakes with the 2003-2005 WRX. Rotors and brake pads are directly interchangeable.
2006-2007 WRX 4 pots (red) and the older JDM 4 pots (gray) will bolt up (uses existing rotor) but will not clear the OEM wheel choices. Will need different wheels or wheel spacers.
2004 STI Brembo- direct bolt on, needs larger wheels for clearance. (Must be 2004 STi rotors as anything after that will have a different bolt pattern). May need to dust shields behind the rotors.

Rear Brakes- Baja has same rears as the outback H6. So anything pad or rotor listed for the "H6 rear" will bolt right up. There are some decent choices as this is used to be a pipular upgrade for 2.0 WRX guys back in the day.

Fuel Pump
OEM Radio Deck
Driver/Passenger Seat
Steering Wheel
Air Bags
Center Gauge Cluster (RPM, MPH, Temp)
Exhaust Manifold/ Equal or on Equal
Turbo Charger
1. STI turbocharger is a direct bolt on. It will fit the stock intercooler with some creative stretching and wiggling. But swapping in a proper length Y-pipe is best. Of course with the USDM STi intercooler and Y-pipe it is a perfect fit.
Radio Deck
1. Radio Deck- Basically anything Subaru the same year or older will fit the baja. I replaced the OEM 6 disc with a 2004 WRX head unit to add a tape deck. I also think the illumination matches a bit better.
Short Throw Shifter
1. Short throw shifters- anything for a Subaru 5MT (WRX, FXT, LGT) of the same model years will fit the Baja 5MT turbo or non-turbo. Anything from the SPT assembly to Kartboy lever or bushings.
Clutch
1. Clutches- 2004-2005 Baja turbo can use anything intended for a 2002-2005 WRX "pull style" clutch. 2006 Baja T is a "push style" and is compatible with 2006-2007 WRX (I do not know about later models)


Baja friendly websites:
http://www.ezsubaruparts.com
http://www.rallitek.com
What custom grills or mesh grills are interchangeable with the Baja? I’m researching legacies and outbacks, but I haven’t tried this forum and I need help?
sethpink86 is offline   Reply With Quote
Old 08-11-2020, 03:43 PM   #286
AdkBaja
Scooby Newbie
 
Member#: 499461
Join Date: Mar 2019
Location: Union, NJ
Vehicle:
2005 Baja Turbo

Default Floor Mats

Husky Liners model 34031 fit the front floors perfectly. And they come up high enough to not catch on the clutch pedal/your clutch foot.

Weathertech rear mats for an 05 Legacy fit in the back but the bump over the driveshaft tunnel is a bit high so there is some space. Easy to pad up the bump a bit to fill that gap.
AdkBaja is offline   Reply With Quote
Old 08-21-2020, 03:00 PM   #287
harleyjohn45
Scooby Newbie
 
Member#: 507583
Join Date: Oct 2019
Location: Alto, NM
Vehicle:
1957 Belair
Red

Default

Quote:
Originally Posted by sethpink86 View Post
What custom grills or mesh grills are interchangeable with the Baja? I’m researching legacies and outbacks, but I haven’t tried this forum and I need help?
Not to steal your thread, I just ordered a 02 thru 07 non catted up pipe from CA auto parts. They had a Stainless tig welded unit with a flex joint for 49.99.
I told them I was installing it on 2006 Baja and they said it would not fit, I told them to send it and I will not return if if I have fitment problems.
I think a piece of trash from the catalytic converter ruined my compressor wheel. I may put a catalytic converter in the exhaust pipe.

Everything I have read on this forum says the up pipes are interchangeable with a WRX or STI for the same year.
harleyjohn45 is offline   Reply With Quote
Old 08-25-2020, 07:11 PM   #288
harleyjohn45
Scooby Newbie
 
Member#: 507583
Join Date: Oct 2019
Location: Alto, NM
Vehicle:
1957 Belair
Red

Default

Quote:
Originally Posted by twheats1 View Post
The WRX and Sti up pipes (up until model year 08) fit without any modification.

If you do not reinstall the EGT sensor you WILL have to either disable the code or do the resistor and it will not .
I just got my 2006 WRX up pipe for my 2006 Baja and It will not fit. Not even close. Mt Baja has a TD04-13 turbo.

Last edited by harleyjohn45; 08-26-2020 at 05:10 PM.
harleyjohn45 is offline   Reply With Quote
Old 08-27-2020, 09:07 AM   #289
roadsterdoc
Scooby Newbie
 
Member#: 48216
Join Date: Nov 2003
Location: Houston area, TX
Default

Quote:
Originally Posted by harleyjohn45 View Post
I just got my 2006 WRX up pipe for my 2006 Baja and It will not fit. Not even close. Mt Baja has a TD04-13 turbo.
That *is* unexpected! Can you post pics of the flange of uppipe you were sent and the inlet of your turbine housing to show the differences?
roadsterdoc is offline   Reply With Quote
Old 09-04-2020, 12:45 PM   #290
harleyjohn45
Scooby Newbie
 
Member#: 507583
Join Date: Oct 2019
Location: Alto, NM
Vehicle:
1957 Belair
Red

Default

Quote:
Originally Posted by honda killer View Post
Upgrading Bajas are a little frustrating, as we all know, because websites/manufactures are not clearly labeling their product as "Baja Compatible". We're forced to do more homework than other, and bounce ideas off others. While that seems fun for other, I find it slows down my work.

I'll start the list, and you reply with updates; then I'll update my main post for quick reference.
Here are some things to get started on:

*******************************Keep in mind the following******************************
If parts are coming off of other Subarus, make sure to list the year and series of vehicle. Also if a part has to be altered to fit, IE trimming; rewiring; welding; or cutting; NOTE IT with a DIY scale of 1-10. Picture are welcome too.
************************************************** *************************************

Top Mount Intercooler (TMIC)
1. USDM STi intercooler (2004-??) Fits a stock Baja turbo with modification to the 90" elbow between the turbo and Y-pipe. The length needs to be changed slightly. Also it requires the Sti or 2.0l wrx bypass valve, Y-pipe, bypass valve vac. line. The bypass valve hose that goes to the intake needs to come from an STI to clear the electronic throttle body. the hoodscoop shroud will no longer fit properly with any larger TMIC.
NOTE: sometimes while in reverse engine rock causes the intercooler to impact the clutch reservoir cap (5MT) a few shims under the mounting tabs where it bolts down will angle the rear up the intercooler up and solve this.

Tumble Generator Valve (TGV)
TGV Deletes
Fuel Injector
Throttle Body
Intake Manifold
Up Pipe
1. 02-07 WRX & STi are compatible, make sure to reinstall the EGT sensor
2. Bosal catless up pipe is a direct bolt on- It is essentially the same as the STI although it may have thicker flanges. Does not have EGT bung so the CEL will have to be turned off at the ECU or the resistor mod. It accepts OEM heat shielding.
Down Pipe
1. Random Technology makes one that is a perfect fit, NO modding (DIY Rating 2)
2. Helix Catless DP requires some cutting to fit (DIY Rating 3)
3. OAKOS Automotive downpipe fits the 5MT Baja turbo with no modification. It clears the brace on the firewall and everything. It is catless and 2.5" diameter.
Brakes
1. Front Brakes: The Baja shares the front brakes with the 2003-2005 WRX. Rotors and brake pads are directly interchangeable.
2006-2007 WRX 4 pots (red) and the older JDM 4 pots (gray) will bolt up (uses existing rotor) but will not clear the OEM wheel choices. Will need different wheels or wheel spacers.
2004 STI Brembo- direct bolt on, needs larger wheels for clearance. (Must be 2004 STi rotors as anything after that will have a different bolt pattern). May need to dust shields behind the rotors.

Rear Brakes- Baja has same rears as the outback H6. So anything pad or rotor listed for the "H6 rear" will bolt right up. There are some decent choices as this is used to be a pipular upgrade for 2.0 WRX guys back in the day.

Fuel Pump
OEM Radio Deck
Driver/Passenger Seat
Steering Wheel
Air Bags
Center Gauge Cluster (RPM, MPH, Temp)
Exhaust Manifold/ Equal or on Equal
Turbo Charger
1. STI turbocharger is a direct bolt on. It will fit the stock intercooler with some creative stretching and wiggling. But swapping in a proper length Y-pipe is best. Of course with the USDM STi intercooler and Y-pipe it is a perfect fit.
Radio Deck
1. Radio Deck- Basically anything Subaru the same year or older will fit the baja. I replaced the OEM 6 disc with a 2004 WRX head unit to add a tape deck. I also think the illumination matches a bit better.
Short Throw Shifter
1. Short throw shifters- anything for a Subaru 5MT (WRX, FXT, LGT) of the same model years will fit the Baja 5MT turbo or non-turbo. Anything from the SPT assembly to Kartboy lever or bushings.
Clutch
1. Clutches- 2004-2005 Baja turbo can use anything intended for a 2002-2005 WRX "pull style" clutch. 2006 Baja T is a "push style" and is compatible with 2006-2007 WRX (I do not know about later models)


Baja friendly websites:
http://www.ezsubaruparts.com
http://www.rallitek.com
STI and WRX up pipes are not compatable with a BAJA.
harleyjohn45 is offline   Reply With Quote
Old 09-04-2020, 06:15 PM   #291
Benhart21
Scooby Specialist
 
Member#: 149617
Join Date: May 2007
Chapter/Region: RMIC
Location: Boulder-ish
Default

I used an 02-05 Grimmspeed WRX up pipe on my '05 Baja for years with no problem.
Benhart21 is offline   Reply With Quote
Old 09-04-2020, 09:24 PM   #292
harleyjohn45
Scooby Newbie
 
Member#: 507583
Join Date: Oct 2019
Location: Alto, NM
Vehicle:
1957 Belair
Red

Default

Quote:
Originally Posted by roadsterdoc View Post
That *is* unexpected! Can you post pics of the flange of uppipe you were sent and the inlet of your turbine housing to show the differences?
Send me your email to [email protected] and I can send photos
Thank You
John

Does anyone know the phone number for JMP turbo repair.
harleyjohn45 is offline   Reply With Quote
Old 09-12-2020, 01:48 PM   #293
Bajagang
Scooby Newbie
 
Member#: 518530
Join Date: Sep 2020
Default Baja 2003

What are the first steps in upgrading a 2003 Baja for cool air intake?
Bajagang is offline   Reply With Quote
Old 09-13-2020, 12:11 AM   #294
GalaxyWide
Scooby Newbie
 
Member#: 383291
Join Date: Mar 2014
Chapter/Region: MWSOC
Location: Great White North
Vehicle:
2004 Forester XT
Cayenne Red

Default

Don't, because the factory intake is already cold air. Remove the snorkus if you absolutely must have induction noise.
GalaxyWide is offline   Reply With Quote
Old 09-14-2020, 03:50 PM   #295
noisybaja
Scooby Newbie
 
Member#: 518575
Join Date: Sep 2020
Default

thanks for the research! great looking out
noisybaja is offline   Reply With Quote
Old 09-30-2020, 05:44 PM   #296
AdkBaja
Scooby Newbie
 
Member#: 499461
Join Date: Mar 2019
Location: Union, NJ
Vehicle:
2005 Baja Turbo

Default

Cobb SUBARU TURBO HEATSHIELD 2002-2007 WRX, 2004-2008 FXT, 2004-2020 STI
( https://www.cobbtuning.com/products/...-2004-2020-sti ) fits the Baja Turbo with the stock bracket. I had to reuse the larger of the two heat shield bolts since they only sent one size bolt with the product. Fits over Blouch 16G with Turbo XS downpipe; should fit stock turbo and DP as well.
AdkBaja is offline   Reply With Quote
Old 10-01-2020, 10:58 AM   #297
Zadok
Scooby Newbie
 
Member#: 38360
Join Date: Jun 2003
Location: Harrisburg, Pa.
Vehicle:
2006 Baja Turbo 5MT
Atlantic Blue Pearl

Default

Well for all you guys who have EJ255's that crapped out, I can confirm that the EJ20Y/X engine's do in fact bolt right up and connect to the factory wiring harness. A few sensors need changed and a custom downpipes needs made if you decide to use the twin scroll that comes with it.
INFO:
https://forums.nasioc.com/forums/sho....php?t=2873087
PICTURES:
https://www.facebook.com/media/set/?...0232127&type=3
Zadok is offline   Reply With Quote
Old 04-15-2021, 03:54 PM   #298
topherbaja06
Scooby Newbie
 
Member#: 523727
Join Date: Apr 2021
Chapter/Region: BAIC
Location: Sonoma County
Vehicle:
2006 Baja
Silver

Question Baja NA to Turbo?

I've lurked on forums in the past to see how big of an undertaking it would be to turbocharge my NA '06 Baja and it's pretty discouraging to say the least. Anyone have experience doing this?
topherbaja06 is offline   Reply With Quote
Old 04-16-2021, 01:40 AM   #299
Chi_San
Scooby Guru
 
Member#: 53558
Join Date: Jan 2004
Chapter/Region: NWIC
Location: Deadford, OR
Vehicle:
2005 Baja Turbo
White/Silver/Black 3tone

Default

Quote:
Originally Posted by topherbaja06 View Post
I've lurked on forums in the past to see how big of an undertaking it would be to turbocharge my NA '06 Baja and it's pretty discouraging to say the least. Anyone have experience doing this?
It's easier to just sell it and buy a Turbo model, sadly.

You can open source tune a 2006 NA, but... You're limited on what you can do, mostly by cost to performance ratio.
Chi_San is offline   Reply With Quote
Old 04-16-2021, 07:50 AM   #300
2-fast
Scooby Newbie
 
Member#: 70610
Join Date: Sep 2004
Default

Quote:
Originally Posted by topherbaja06 View Post
I've lurked on forums in the past to see how big of an undertaking it would be to turbocharge my NA '06 Baja and it's pretty discouraging to say the least. Anyone have experience doing this?
see some turbo kits on Xcceleration's website: https://www.xcceleration.com/engine-packages.html

they are for the NAs, might be worth checking with them to see if they fit the Baja Sport...
2-fast is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
clutch and flywheel what works with what?!?! scobaru Subaru Conversions 10 01-06-2005 10:21 PM
What Works with Borla Hush? HerculesPeanut Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) 9 06-28-2004 04:21 PM
ej20's and what works with what scobaru Subaru Conversions 4 10-24-2003 07:28 PM
Advan RG works with what brakes??? Subaruist Brakes, Steering & Suspension 1 10-22-2002 11:23 PM
Which cold air intakes work with what FMICs? Diversion Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) 14 07-15-2002 07:55 AM

All times are GMT -4. The time now is 08:30 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Copyright ©1999 - 2019, North American Subaru Impreza Owners Club, Inc.

As an Amazon Associate I earn from qualifying purchases.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission
Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.