Only running my low boost map, as i'm running a new fuel map which I did not get all that much time to tune with the wideband a few weeks ago. Plenty of headroom here, I was between 2 and 3 psi shy of my targets.........i'm now targetting 18psi at 3500, 16.5psi at 4000 , 12.5psi at 6000 and 12psi at 7000 and it's pulling much harder than yesterday when I did the dyno run. No det, 94 octane.
Mods uppipe, downpipe, centre and muffler, Perrin IC silicon hoses, UTEC with me tuning.
UTEC log when I ran on the dyno, as you can see only getting into the 15's psi
Maximum torque arrives as early as 3000 RPM, nice and flat.
Code:
Load Knock Mod Mod Mod
RPM MAP MAF TPS Site Count AFR Ign#1 Inj#1 Ign Fuel Boost MAF
psia V % deg duty deg % (CL) V
5500 +13.9 4.1 100 80 00 rich +23.5 91.1 +18.0 -2.0 350.00 4.0
5527 +13.5 4.1 100 80 00 rich +23.0 94.6 +18.5 -1.7 350.00 4.0
5737 +13.1 4.1 100 70 00 rich +24.9 89.0 +20.2 -3.3 350.00 4.0
5151 +14.1 4.0 100 80 00 rich +21.1 84.8 +17.8 -2.6 350.00 3.9
5232 +14.7 4.1 100 90 00 rich +21.9 88.7 +18.0 -1.2 350.00 4.0
5316 +14.1 4.1 100 80 00 rich +21.7 87.9 +18.0 -2.7 350.00 4.0
5050 +14.3 4.0 100 90 00 rich +19.5 87.9 +18.0 -1.3 350.00 4.0
5232 +14.3 4.1 100 80 00 rich +20.3 86.6 +18.0 -1.9 350.00 4.0
5307 +15.1 4.1 100 90 00 rich +19.5 95.9 +18.0 -1.1 350.00 4.0