View Single Post
Old 07-18-2020, 06:20 PM   #464
brettjson
Scooby Newbie
 
Member#: 490337
Join Date: Aug 2018
Default

So I think I did some serious damage to the WRX. I was having issues with louder hum from the AXXESS Tyto so I pulled the headunit out and was messing around with the batt term off. Then I reconnected the term and was playing with the head unit including cycling between off, acc, and on (I have a push to starto.

But now, I cannot get the car to go into the "on" mode and I cannot start it (no crank). I have checked every fuse in the dash and engine bay. The car DOES go into ACC mode and the headunit powers up. Then when I hold the clutch in the little light on the push to start button goes from orange to green. Then when I push the button, nothing happens. No dash lights, no crank, nothing.

Note when I am in ACC I see little profile of the WRX in the gauge cluster screen. But, it will not do the thing where the tachy and speedo go up and down. There are no gauge cluster lights except for occasional flashing of the car and lock symbol.

Basically it is acting normaly until you try to go to "on" and then nothing.

Any ideas? Thanks.
* Registered users of the site do not see these ads.
brettjson is offline   Reply With Quote