View Single Post
Old 11-28-2005, 12:34 PM   #11
Gethin
Scooby Specialist
 
Member#: 2998
Join Date: Nov 2000
Chapter/Region: VIC
Location: BC
Vehicle:
2002 WRX
WRB

Default

Only running my low boost map, as i'm running a new fuel map which I did not get all that much time to tune with the wideband a few weeks ago. Plenty of headroom here, I was between 2 and 3 psi shy of my targets.........i'm now targetting 18psi at 3500, 16.5psi at 4000 , 12.5psi at 6000 and 12psi at 7000 and it's pulling much harder than yesterday when I did the dyno run. No det, 94 octane.

Mods uppipe, downpipe, centre and muffler, Perrin IC silicon hoses, UTEC with me tuning.

UTEC log when I ran on the dyno, as you can see only getting into the 15's psi

Maximum torque arrives as early as 3000 RPM, nice and flat.

Code:
                   Load Knock                     Mod   Mod         Mod
 RPM   MAP  MAF TPS Site Count  AFR  Ign#1  Inj#1  Ign   Fuel Boost  MAF
       psia  V   %                    deg   duty   deg    %   (CL)    V 

5500 +13.9 4.1 100  80    00   rich +23.5   91.1 +18.0  -2.0 350.00 4.0
 5527 +13.5 4.1 100  80    00   rich +23.0   94.6 +18.5  -1.7 350.00 4.0
 5737 +13.1 4.1 100  70    00   rich +24.9   89.0 +20.2  -3.3 350.00 4.0


5151 +14.1 4.0 100  80    00   rich +21.1   84.8 +17.8  -2.6 350.00 3.9
 5232 +14.7 4.1 100  90    00   rich +21.9   88.7 +18.0  -1.2 350.00 4.0
 5316 +14.1 4.1 100  80    00   rich +21.7   87.9 +18.0  -2.7 350.00 4.0

5050 +14.3 4.0 100  90    00   rich +19.5   87.9 +18.0  -1.3 350.00 4.0
 5232 +14.3 4.1 100  80    00   rich +20.3   86.6 +18.0  -1.9 350.00 4.0
 5307 +15.1 4.1 100  90    00   rich +19.5   95.9 +18.0  -1.1 350.00 4.0
* Registered users of the site do not see these ads.

Last edited by Gethin; 04-21-2006 at 01:16 AM.
Gethin is offline   Reply With Quote