Quote:
Originally Posted by Cougar4
I suggest you isolate at least the taillight connection to see if that clears up the warning lights. If it doesn't help then it seems you have something else going on to cause the warning light issue. What color wire did you tie into for the taillight connection, and where exactly?
|
I cut all the wires and the warning lights went away, so it’s directly related to the added lights. I suspect the computer is seeing a difference in resistance but I’m not sure.
I tied into the black for the ground and black/white and the brown on the right hand side. I forget the color on the other side but the b/w wire was a different color. I’ll see if I can post a pic in a few