Quote:
Originally Posted by DIGGYGV8
Solution:
- Get in the car, sit in driver's seat (make sure all doors are closed)
- Insert key into ignition and turn to ON (2 clicks)
- Within this time, insert, and eject seatbelt from buckle 20 times within 30 seconds (I've heard that outbacks, foresters, and other Subarus require 20 times as well)
- When the process is complete, there will be no visual/audible indication, take the key out of ignition
|
Found and confirmed by another user with the MY12 2.0i. Below is the quote from the relevant post in the thread:
Quote:
Originally Posted by SleepNMnky
Turn the key to the ACC position & quickly buckle & unbuckle your seatbelt at least 20 times within 30 seconds. Then take the key out. Then start your car. The alarm (seatbelt "alarm") will sound for about ten seconds then go off never to be heard again. Took me 3 tries & on the 3rd I had my door open while doing the procedure but I'm not sure that had any bearing on it. If you ever get your ECU reset or change your battery you'll have to do it again.
|
I presume the MY13 operates in the same manner (see rationale in my previous post re: a/c disable for defrost vent setting).